Hi All
I'm looking to set up the standard mast rake on a mk3, 24'2" though 24'6". Could anyone tell me where the measurement datum on the transom is.
I seam to remember someone using a straight batten across the transom?
I have a scalloped top transom? And no rudder fittings at present.
Still using the 20' up mast from gooseneck as a starting point.
Any help would be much appreciated
Thanks
Mike 1286
MK3 Mast rake datum
-
- Posts: 3
- Joined: Sat Jun 28, 2008 7:06 pm
- Your known name (real identity): Mike
- Your family name (real identity): Stace
- Sail Number: 1326
- County or State or Province: Pembrokeshire
- Country: Wales
- Your principle sailing club: Tenby Sailing Club
-
- Posts: 108
- Joined: Wed Aug 10, 2011 12:00 pm
- Your known name (real identity): Ian
- Your family name (real identity): McDonald
- Sail Number: 1285
- County or State or Province: Stafford
- Country: UK
- Your principle sailing club: Blithfield Sailing Club
Re: MK3 Mast rake datum
Jon and I use the top of the transom on 1285 and it works.
My understanding was that the straight line method just applied to mk4 on where the transom has been modified.
My understanding was that the straight line method just applied to mk4 on where the transom has been modified.